We're thrilled to offer faster shipping on all your valuable orders. Place your order today and enjoy speedy delivery!

Call Us 714-363-1322

Same Day Shipping Available – All Orders Insured!

Found a Better Price? We'll Beat It – Guaranteed!

We're thrilled to offer faster shipping on all your valuable orders. Place your order today and enjoy speedy delivery!

Call Us 714-363-1322

Same Day Shipping Available – All Orders Insured!

Found a Better Price? We'll Beat It – Guaranteed!

Noce Travertine 4 Gang TOGGLE Switch Wall Plate/Cover Plate/Switch Plate

$89.99

$58.99 Piece
Size:
4 1/2" X 8 1/4"
Description:
4-TOGGLE
Finish:
Honed

OR

TOTAL PRICE

$
Buy 2 or More & Get 25% Off! This product includes screws, but because it's made from natural stone, it is fragile. Avoid over-tightening when screwing to prevent breakage. Handle with care!
Size Chart

How Much Do I Need?

Contact Us

In stock

Fast Delivery

Insured Shipping

Secure Payments

  • DESCRIPTION
  • SPECIFICATIONS
  • INSTALLATION

100% Authentic Marble Wall Plate/Switch Plate Covers

Looking to add a touch of luxury to your home? Our exclusive Wall Plate and Switch Plate Covers are made from 100% authentic marble and are crafted to bring the timeless beauty of natural stone into your living spaces. These high-quality covers are designed to blend seamlessly with your walls, giving your bathroom, kitchen, living room, and more an elegant and cohesive look.

Important Installation and Care Information

Please note, these marble switch plate covers are non-returnable due to their delicate nature. Each piece is crafted from genuine natural stone, which means it requires careful handling during installation—especially around the screw points. While we ensure secure packaging to protect your purchase during shipping, any breakage during installation is usually a result of mishandling. We highly recommend taking extra care to ensure your installation goes smoothly.

Unique Natural Stone Variations

Remember, each piece of natural stone is unique! Expect some variation in color, texture, and pattern between individual pieces, especially if you’re ordering in larger quantities. These variations are part of the charm and authenticity of using real natural stone like marble and travertine.

Enhancing your home’s interior has never been easier. Our premium Wall Switch Plate Covers are perfect for both residential and commercial applications, making them versatile enough for use in various settings—whether inside or outside. Whether you’re updating your bathroom or kitchen, upgrading your living room or entryway, or adding a decorative accent to your backyard or patio, these covers are designed to fit seamlessly with your décor. They’re not only stylish but also incredibly durable, ensuring that your space looks great for years to come.

These covers are on sale now and, given their non-returnable status, offer unbeatable value for genuine marble and travertine products. Easy to install, they’re the perfect finishing touch for your home improvement projects. Want to see more? Check out our complete collection of marble products for more ways to bring natural elegance into your home.

Keywords for Optimization:

  • Marble Switch Plate Covers
  • Natural Stone Wall Plates
  • Luxury Home Accessories
  • High-Quality Marble Covers
  • Non-Returnable Stone Covers
  • Interior Design Marble Plates
  • Marble and Travertine Wall Plates
  • Natural Stone Décor
  • Elegant Wall Switch Covers

Product : Noce Travertine 4 Gang TOGGLE

Product Size : 4 1/2"(length) X 8 1/4"(width)

Product Thickness : 1/4"

Product Type : Toggle

Material : Travertine

Color : Brown, Beige, Dark Brown

Finish : Honed

Kindly reminder : Please handle the screws with care. They are made of natural stone, not plastic or metal and can break if too much force is applied.

All Size-Dimensions Are Nominal and Non-Returnable / Non-Exchangeable

Material Inspection and Installation Guidelines

Material Inspection

Before installation, carefully inspect all goods for any damage or defects such as chipped edges or broken pieces. Natural stone surfaces, including marble and travertine, will have naturally occurring variations in color, pattern, texture, and veining that may differ from what was pictured. No adjustments or services can be provided once installation has begun.

Substrate Preparation

To ensure a proper installation, follow these substrate guidelines:
Surface Condition: The substrate must be clean, flat, and free of contaminants, including curing compounds. It should also be free of cracks.
Waterproofing: In wet areas, waterproof the substrate following the manufacturer's recommendation for a waterproofing and crack prevention membrane compatible with your setting material.
Expansion Joints: Install expansion joints at all changes in plane in the tile work and where tile abuts restraining surfaces. Use silicone caulking sealant instead of grout in all corner joints.

Installation

Dry-Fitting

Pattern Planning: Dry-fit your pattern before starting installation. Visualize the installation and plan the placement of pieces, especially with tiles that have a lot of variation.

Mortar Application

Thin-Set Mortar: Use white thin-set mortar to avoid affecting the tile color. For faster installation, use a rapid curing thin-set mortar.
Application:
◦ Apply adhesive to an area that can be covered within 10-15 minutes.
◦ Grout joints should be a minimum of 1/16” and not butt set.
◦ Smooth down the ridges using the flat side of the trowel before fixing the tiles in the mortar bed.
◦ For our ceramic material, use a 3/16" or 1/4" square notch trowel. For other tiles, a 9" trowel with a 1/8" square notch is recommended.

Grouting

Non-Sanded Grout: Use non-sanded grout for ceramic tiles to prevent scratching. Test a small area before grouting to ensure the stone surface does not scratch.
Packing Grout Joints: Pack grout joints fully, avoiding pits or voids. Clean excess grout as you work, and do not let it harden completely.
Cleaning: Never use acids to clean grout haze. Use a damp sponge for final cleaning and smoothing grout joints.
Grout Release: Apply grout release before grouting to facilitate cleaning and protect against staining from contrasting color grouts.

Cutting

Tools: Use a wet-saw with a new, continuous rim diamond blade designed for cutting ceramic tile for the best results.

Cleaning

General Cleaning

Porcelain Tile: Clean with a damp sponge mop and a solution of 1/4 cup white vinegar to every 2 gallons of water. Sweep or vacuum regularly.

Unpolished Surfaces

Sweeping: Use a soft-bristle broom and sweep in two directions: along the grain and diagonally to dislodge dust and debris.
Cleaning Solution: Saturate the tile with a neutral cleaning solution like vinegar and hot water, let it sit for 5–10 minutes, then scrub with a brush using the two-direction method.
Rinsing: Rinse with clean water to remove the cleaning solution.

High Traffic Areas

• Clean at least once per day and wet mop regularly.

Reminders

Avoid Certain Cleaners: Do not use ammonia, bleach, or acid-based cleaners, as they may alter grout color. Avoid wax, oil-based, abrasive cleaners, sealants, and agents with dyes or colors.
Steel Wool: Do not use steel wool pads, as leftover particles may rust.
Entrance Rugs: Place rugs at entrances to minimize dirt and grit from being tracked onto the tile flooring from outdoors.
By following these guidelines, you will ensure the successful and lasting installation of your natural stone surfaces.

The Waste Factor

How Much Do I Need to Order?

The best practice is to order at least 10-30% more than your project requirements to account for potential issues, waste due to cutting material, and other potential breakage during installation.
When installing natural stone, understanding the waste factor is crucial. The waste factor refers to the amount of stone that will be cut, trimmed, or otherwise discarded during the installation process. The waste factor varies depending on how tightly the stones are fitted; tighter joints require more trimming and thus produce more waste.

Waste Factor Considerations

Project Size: Larger projects might have a slightly lower percentage of waste due to more efficient use of materials.
Joint Tightness: Tighter joints increase the waste factor due to more precise trimming.
Stone Variations: Natural stones have variations in color and texture, necessitating extra materials to ensure consistency across the installation.

Example Calculation

For a project area of 1,000 square feet with an expected waste factor of 10% to 30%, you would need to purchase between 1,100 and 1,300 square feet of stone.

Tips for Managing Waste

1. Mock-Up: Create a small mock-up to better estimate your specific waste factor before ordering materials.
2. Order Extra: Always order extra materials for future repairs or additions, as natural stone batches can vary.
3. Efficient Cutting: Plan cuts carefully to minimize waste and use off-cuts in less visible areas.
By accurately calculating the waste factor and ordering extra material, you can ensure a smoother installation process and a consistent appearance of your natural stone veneer.

Installation Tips

Installing natural stone flooring can be a rewarding project, giving your home a luxurious and timeless look. Here's a step-by-step guide to help you through the process:

Materials and Tools Needed:

• Natural stone tiles (marble, granite, slate, etc.)
• Tile adhesive (thin-set mortar)
• Grout
• Tile spacers
• Notched trowel
• Level
• Tape measure
• Tile cutter or wet saw
• Rubber mallet
• Sponge and bucket
• Grout float
• Sealer (specific to your type of stone)
• Safety equipment (gloves, goggles, knee pads)

Step-by-Step Guide:

1. Preparation:

Measure the Area: Calculate the square footage of the area where you plan to install the tiles.
Prepare the Subfloor: Ensure that the subfloor is clean, dry, and level. If necessary, apply a self-leveling compound.
Acclimate the Tiles: Let the stone tiles sit in the installation area for a couple of days to acclimate to the room temperature and humidity.

2. Layout Planning:

Dry Lay the Tiles: Lay out the tiles without adhesive to plan the pattern and placement. Start from the center and work your way out to ensure an even layout.
Mark Guidelines: Use a chalk line to mark the center of the room and create reference lines for laying the tiles.

3. Applying Adhesive:

Mix the Thin-set Mortar: Follow the manufacturer's instructions to mix the mortar.
Spread the Mortar: Using the notched trowel, spread the thin-set mortar on a small section of the subfloor. Hold the trowel at a 45-degree angle to create ridges in the mortar.

4. Laying the Tiles:

Place the Tiles: Press the tiles into the mortar, twisting them slightly to ensure a good bond. Use tile spacers to maintain consistent gaps between the tiles.
Check for Level: Regularly check that the tiles are level and adjust as necessary using the rubber mallet.

5. Cutting Tiles:

Measure and Mark: Measure the tiles that need to be cut to fit along the edges and mark them.
Cut the Tiles: Use a tile cutter or wet saw to cut the tiles to the required size.

6. Grouting:

Allow Adhesive to Cure: Let the adhesive dry for at least 24 hours or as recommended by the manufacturer.
Mix the Grout: Mix the grout according to the instructions.
Apply the Grout: Using a grout float, apply the grout diagonally across the tiles to fill the gaps. Remove excess grout with the float.
Clean the Tiles: Use a damp sponge to wipe off excess grout from the tile surfaces. Rinse the sponge frequently and be careful not to remove grout from the joints.

7. Sealing:

Allow Grout to Cure: Let the grout cure for the recommended time, usually 48-72 hours.
Seal the Tiles: Apply a stone sealer to protect the tiles from stains and moisture. Follow the manufacturer's instructions for application and curing times.

8. Final Touches:

Clean the Floor: After the sealer has dried, give the floor a final cleaning to remove any residue.
Inspect the Installation: Check the tiles and grout lines for any imperfections and make any necessary repairs.

Tips:

• Always wear safety equipment when cutting tiles.
• Follow the manufacturer's instructions for all materials used.
• Work in small sections to prevent the adhesive from drying out before the tiles are laid.
• Regularly clean your tools to prevent the mortar and grout from hardening on them.
This guide should help you install natural stone flooring successfully. If you have any specific questions or encounter any issues during the installation, feel free to ask!

California Proposition 65

WARNING: Products sold at Surfaces Galore contain chemicals, including stone dust, which are known to the State of California to cause cancer, birth defects or other reproductive harm.

Disclaimer: Surfaces Galore provides information to give customers an overview of the process from choosing to installation of our natural stone surfaces. However, we are not responsible for any mistakes, problems, or issues that may arise. All responsibility for the selection, installation, and any associated outcomes rests solely with the customers.

Back to top
Make an offer
Make an offer
Make an offer